Dailygamingtips.com
SOCIAL:
Filed under: PC games cheats

Extreme G2 Cheats

Extreme G2

Cheatmode:
———-_
Before you Race change your name
to one or more of these:

Code Result
——————
nitroid – Unlimited Nitro
mistake – Unlimited missiles
xcharge – Unlimited weapon & shield charge
Neutron – Makes it look like your racing in the film “tron”
spyeye – Airship View
spiral – Rotating view camera
misplace – Gives u better weapons on the tracks
2064 – Futuristic cars
xxx – Speeds the game up
flick – Only displays 1/4 of the screen when playing
pixie – Remove screen fog

Level Codes:
————
SRG94CCFW7LH – Critical Mass (Hard difficulty)
636K9KW76ZMK – Meltdown

Good bikes:
———–
The Surge is the fastest regular bike.

Destroying Morship in arcade mode:
———————————
Use two homing missiles to destroy the Morship.

Shortcut in Meza Virs:
———————-
Instead of clearing the gap and going into the first loop, hit the brakes in
advance and do not clear the gap. You should skip the loop entirely and gain a
huge advantage on the track.

Hole in Lumina Falls:
———————
Enable the “WipeOut” mode code. Near the harbor on Lumina Falls, fly above
the water, tilt down. and enter the small hole. Note: This is difficult to do.

Hidden areas:
————-
If you hit one of the gray fences with the green and red lights blinking on
them hard enough and correctly, you should go through it. You will end up at a
different section of the track that you normally cannot reach unless you choose
a different path before you race.
The only way to get out is to keep driving. The track will cut off and you will
drive off a cliff, bringing you back to the normal track.

Gamepad controls:
—————–
Press [Space] at the “Select Bike” menu. Press [Enter] to change the controls
for each action. Press a gamepad button and that button will now be set for
that item. Note: You can also do this to change the keyboard keys for that
item. Continue doing this for all the items to assign them to a gamepad button.

Note: There is no setup for the axis because it is automatically set, but
should be calibrated through the Windows Control Panel if required.

Click to rate this post!
[Total: 0 Average: 0]